LABORATORY FOR ACTIVE MATERIALS AND SMART STRUCTURES

LAMSS People

Academic Faculty | Research Staff | Current Students | LAMSS Alumni | Group Pictures

Academic Faculty

Victor Giurgiutiugiurgiutiu, victor

TItle: Professor, Mechanical Engineering
Phone: 803-777-8018
email | web |
Location
: A222 (300 MAIN)
Research:  Laboratory for Adaptive Materials and Smart Structures
The Aeronautical Journal Editorial Board


Lucy Yu YU,Lingyu (lUCY)

TItle: Asst. Professor, Mechanical Engineering
Phone: 803-777-0070
email | web |
Location
: A220 (300 MAIN)

BANERJEE, SOURAV

TItle: Asst. Professor, Mechanical Engineering
Phone: 803-777-4596
email | web |
Location
: A117 (300 MAIN)

 

Research Associates


Jingjing Bao Bao, Jingjing (Jack)

TItle: Post-doctoral Research Fellow
Phone: 803-777-0619
email | web |
Location
: A236 (300 MAIN)

Bin Lin Lin, Bin

TItle:  Post-doctoral Research Fellow
Phone: 803-777-0619
email | web |
Location
: A236 (300 MAIN)

 

Graduate Students

BARAZANCHY, Darun, “In Process Structural Health Monitoring of Aerospace Composite Structures” (provisional title), University of South Carolina, Dept. of Mechanical Engineering, Fall 2014-present

BHUIYAN, MD Yeasin, “Interaction of Guided Waves with Damage and Structural Boundaries for Structural Health Monitoring” (provisional title), University of South Carolina, Dept. of Mechanical Engineering, Spring 2015-present

FRANKFORTER, Erik, “Piezo-optical Structural Health Monitoring with PWAS transducers and FBG sensors” (provisional title), Univ. of South Carolina, Dept. of Mechanical Engineering, Spring 2013-present

MIGOT, Asaad, “Structural Health Monitoring of Aerospace Composite Structures” (provisional title), University of South Carolina, Dept. of Mechanical Engineering, Fall 2014-present

PODDAR, Banibrata, “Active and Passive Structural Health Monitoring with Piezoelectric Wafer Active Sensors” (provisional title) , Univ. of South Carolina, Dept. of Mechanical Engineering, Fall 2011-present

ROTH, William, “Structural Health Monitoring of Composite Joints” (provisional title), Univ. of South Carolina, Dept. of Mechanical Engineering, Fall 2013-present

LAMSS Alumni

ABDELRAHMAN KAMAL, Ayman, “Ultrasonic Transduction in Metallic and Composite Structures for Structural Health Monitoring using Extensional and Shear Horizontal Piezoelectric Wafer Active Sensors”, Univ. of South Carolina, Dept. of Mechanical Engineering, graduated Summer 2014; currently employed at MIRATECH Co., Tulsa, OK 74108

BAO, Jingjing (Jack), “Lamb Wave Generation and Detection with Piezoelectric Wafer Active Sensors”, Univ. of South Carolina, Dept. of Mechanical Engineering, graduated Summer 2003; currently postdoc at USC

BOTTAI, Giola, “Fundamental Studies in the Lamb-Wave Interaction between Piezoelectric Wafer Active Sensor and Host Structure During Structure Health Monitoring”, Univ. of South Carolina, Dept. of Mechanical Engineering, graduated Spring 2010; currently at University of Stockholm, Sweden

CUC, Adrian, "Structural Health Monitoring of Adhesively Bonded Joints with Piezoelectric Wafer Active Sensors”, Univ. of South Carolina, Dept. of Mechanical Engineering, graduated Summer 2010, currently employed at Volvo 3P, Greensboro, NC, and Adjunct Assistant Professor at NC A&T State Univ., Mechanical Engr., Greensboro, NC

KAMAS, Tuncay, “Fluid-Coupled Piezoelectric Wafer Active Sensors” (provisional title) , Univ. of South Carolina, Dept. of Mechanical Engineering, graduated Fall 2014; currently Faculty Member at Osmangazi University, Turkey

LIU, Weiping, “Mechatronics Aspects of Structural Health Monitoring with Piezoelectric Wafer Active Sensors” (provisional title), Univ. of South Carolina, Dept. of Mechanical Engineering, Fall 2003-Fall 2010 (interrupted)

LIN, Bin, “Power and energy transduction in piezoelectric wafer active sensors for structural health monitoring: modeling and applications”, Univ. of South Carolina, Dept. of Mechanical Engineering, graduated Spring 2010; currently Post doc at USC

POMIRLEANU, Radu, "Flow-induced Vibrations of Nuclear Reactor Tubes", Univ. of South Carolina, Dept. of Mechanical Engineering, graduated Spring 2006; currently Senior Scientist at Westinghouse Corporate Research Center in Pittsburgh, PA

ROMAN, Catalin, “Structural Health Monitoring of Composite Laminates Using Piezoelectric and Fiber Optics Sensors”, Univ. of South Carolina, Dept. of Mechanical Engineering, graduated Spring 2013, currently Mechanical Design Engineer, Princeton Plasma Physics, Princeton, NJ

SHEN, Yanfeng, “Structural Health Monitoring using Linear and Nonlinear Ultrasonic Guided Waves”, Univ. of South Carolina, Dept. of Mechanical Engineering, graduated Summer 2014, currently postdoc at University of Michigan

XU, Buli, “Structural Health Monitoring Instrumentation, Signal Processing and Interpretation With Piezoelectric Wafer Active Sensors”, Univ. of South Carolina, Dept. of Mechanical Engineering, graduated Spring 2009; currently Electrical Engineer with KEMET Electronics Corp., in Greenville, SC

YU, Lingyu (Lucy), " In-Situ Structural Health Monitoring with Piezoelectric Wafer Active Sensor Guided-Wave Phased Array”, Univ. of South Carolina, Dept. of Mechanical Engineering, graduated Spring 2006; currently tenure-track Assistant Professor at USC

ZAGRAI, Andrei, "Piezoelectric Wafer Active Sensors Electro-Mechanical Impedance Technique Structural Health Monitoring", Univ. of South Carolina, Dept. of Mechanical Engineering, graduated Spring 2002; currently tenured Associate Professor and Chair of the Department of Mechanical Engineering at New Mexico Institute of Technology, Socorro, NM; recipient of the Achenbach Medal 2011.

ZOUHRI, Khalid, “Structural Health Monitoring” (provisional title), Univ. of South Carolina, Dept. of Mechanical Engineering, APOGEE, Fall 2012-Spring 2013 (interrupted)

 

LAMSS Research Team Picture

(2010)

(2005)

(2000)

Lamss Members