Go to USC home page USC Logo USC Mechanical Engineering Faculty and Staff
UNIVERSITY OF SOUTH CAROLINA
UNDERGRADUATES | GRADUATES | APOGEE / DISTANCE ED | NUCLEAR ENGINEERING | FACULTY & STAFF

DEPARTMENT HOME

MISSION, VISION & EDUCATIONAL OBJECTIVES

FACULTY & STAFF DIRECTORY

COMMONLY USED FORMS

TEACHING SCHEDULES

FACULTY OPENINGS

COMPUTER SUPPORT

BLACKBOARD
USC  THIS SITE
Dr. Abdel Bayoumi  

Dr. Abdel E. Bayoumi, Professor

Department of Mechanical Engineering
300 Main Street, Room A223
Columbia, SC 29208
Email: bayoumi@engr.sc.edu
Tel: (803)777-1845
FAX: (803)777-0106
Curriculum Vitae (PDF)

EDUCATION

  • PhD, Mechanical and Aerospace Engineering, NCSU, Raleigh, North Carolina, 1982
  • MS, Mechanical Engineering, Helwan University, Cairo, Egypt, 1976
  • BS, Mechanical Engineering, Tanta University, Egypt, 1973

RESEARCH & INTERESTS

  • Information Technology:
    • Modeling, Simulation, and Computations
    • Health Monitoring Data Storage and Data Security
    • Information Technology in Biomedical Research
  • MEMS/NEMS/Mechatronics:
    • MEMS/NEMS Manufacturing and Qualifications
    • Mechatronics Manufacturing and Design
    • Precision Engineering and Metrology
  • Materials and Mechanics:
    • Mechanical Diagnosis/Prognosis of Military Equipment
    • Image Processing in Materials Characterizations
    • Mechanistic Modeling of MFG Processes

HONORS & AWARDS

  • Excellence in Teaching Award - Washington State University, 1987, 1991, and 1993
  • Excellence in Teaching Award - The American Society of Engineering Education, 1994
  • Research Excellence Award - College of Engineering and Architecture - Washington State University, 1990, 1991, 1993
  • Boeing Manufacturing Professor - College of Engineering and Architecture - Washington State University, 1993
  • Postdoctoral Fellowship, Engineering Research Division, School of Engineering, North Carolina State University, 1982-1983
  • University Graduate Excellent Researcher Scholarship, a full scholarship was awarded for the Master of Science in Mechanical Engineering, Helwan University, Egypt, 1974-1976

PROFESSIONAL EXPERIENCE

  • 1998 to present: Professor, Department of Mechanical Engineering, University of South Carolina, Columbia, South Carolina
  • 1998 to 2005: Chair, Department of Mechanical Engineering, University of South Carolina, Columbia, South Carolina
  • 1996 to 1998: Professor of Manufacturing Science and Engineering, Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, North Carolina
  • 1993 to 1995: Project Manager, Image and Printing Division, Hewlett-Packard Company, Corvallis, Oregon
  • 1983 to 1995: Assistant/Associate/Professor of Advanced Manufacturing Science, School of Mechanical and Materials Engineering, Washington State University, WSU, Pullman, Washington
  • 1991 to 1992: Visiting Scholar, Engineering Department, The American University in Cairo, AUC, Cairo, Egypt
  • 1982 to 1983: Postdoctoral Research Associate, Engineering Research Division, North Carolina State University, Raleigh, NC

PROFESSIONAL SERVICES

  • SME (session, symposia, & conference organizations)
  • ASME (session, symposia, & conference organizations)
  • ASEE (session, symposia, & conference organizations)
  • SES (session, symposia, & conference organizations)
  • Technical Reviewer: NS
  • Technical Reviewer: McGraw Hill Book Co.
  • Technical Reviewer: Journal Metallurgical Transaction
  • Technical Reviewer: Journal of Plasticity
  • Technical Reviewer: Journal of Materials Research
  • Technical Reviewer: NAMRI
  • Technical Reviewer: Journal of Engineering Mechanics
  • Technical Reviewer: National Research Council
  • Technical Reviewer: International Journal of WEAR

PROFESSIONAL SOCIETIES

  • North American Manufacturing Research Institute NAMRI - member
  • American Society of Engineering Education ASEE - member
  • American Society of Mechanical Engineers ASME - member
  • Society of Manufacturing Engineers SME - senior member
  • Engineering Honorary Tau Beta Pi

PUBLICATIONS

Journal Manuscripts In Review, 2004:

  1. G. Yucesan, Jamil Khan and A. Bayoumi, “Least Square Methods for Determination of Cutting Force Parameters in End Milling: Model and Verification, Journal of Manufacturing Science and Engineering
  2. G. Yucesan, Jamil Khan and A. Bayoumi, “Least Square Methods for Determination of Cutting Force Parameters in End Milling: Experimental Verification, Journal of Manufacturing Science and Engineering

Newspaper Articles:

  1. A. Bayoumi, "Candidates must face increased energy importation," The State Newspaper, Jan. 14, 2004.
  2. A. Bayoumi, "Time to move ahead on nuclear waste disposal," The State Newspaper, Dec. 9, 2003.
  3. A. Bayoumi, "U.S. needs to revive nuclear plant production," The State Newspaper, Apr. 19, 2003.

Refereed Journal Papers:

  1. L. Gelman, V. Giurgiutiu and A. Bayoumi, 2004, “Statistical Analysis of the Dynamic Mean Excitation for Sour Gear,” accepted, ASME Journal of Vibration and Acoustics
  2. Shet, X. Deng and A. Bayoumi, 2003, “Finite Element Simulation of High-Pressure Water-Jet Assisted Metal Cutting, International Journal of Mechanical Sciences, vol. 45, pp. 1201-1228
  3. V. Giurgiutiu, Abdel Bayoumi, and Gregg Nall, January 2002, ”Mechatronics and Smart Structures: Emerging Engineering Disciplines of the New Millennium,” Journal of Mechatronics, Pergamon Press, UK, vol. 12, no. 2, pp. 169-181
  4. I. Shaha Guven Yucesan, Abdel Bayoumi, and Jamil Khan, May 2002, ”Least Square Method for Determination of Cutting Force Parameters in End Milling-Model and Experimental Verification,” Transactions of the North American Manufacturing Research, vol. 30, no. 1, pp. 161-169
  5. J. S. Lyons and Abdel E. Bayoumi,” May 2000, ”CQI Processes, Results, and Program Improvements foe Engineering Design,” IEEE Transactions on Education, vol. 43, no. 2, pp. 174-181
  6. M. K. Khraisheh and A. E. Bayoumi, 1999, “On the Mechanistic Modeling of Cutting Forces of Milling Operations: A Control Algorithm,” Transactions NAMRI-SME, pp. 171-181
  7. M. K. Khraisheh, A. E. Bayoumi, and S. Barnwal, 1999, “On the Mechanistic Modeling of Cutting Forces of Milling Operations: Hole Making using an End-Mill Cutter,” Transactions of NAMRI-SME, pp. 162-169
  8. M. K. Khraisheh, H. M. Zbib, C. H. Hamilton and A. E. Bayoumi, 1997,”Constitutive Modeling of Superplastic Deformation. Part I: Theory and Experiments,” Int. Journal of Plasticity, Vol. 13, No. ½, pp. 143 – 164
  9. X. D. Ding, H. M. Zbib, C. H. Hamilton and A. E. Bayoumi, January 1997, “On the Stability of Biaxial Stretching with Application to the Optimization of Superplastic Blow-Forming,” J. Eng. Mater. And Tech., ASME Trans, pp. 26-31
  10. Q. Xie, A. E. Bayoumi and H. M. Zbib, 1996, "A Study on Shear Localization in Chip Formation of Orthogonal Machining," Intl. J. Machine Tools & Manufacture, vol. 36, No. 7, p. 835
  11. Q. Xie, A. E. Bayoumi and H. M. Zbib, 1996, "Analytical and Experimental Study of Shear Localization and Chip Formation," J. Materials Engineering and Performance, vol.4, no.1, pp. 32-39
  12. A. E. Bayoumi and Q. Xie, 1996, "Some Metallurgical Aspects of Chip Formation in Cutting Ti 6 wt. %Al 4wt. %V Alloy," J. Materials Science and Engineering A, vol. 190, pp. 173-180
  13. X. D. Ding, H. M. Zbib, C. H. Hamilton and A. E. Bayoumi, 1995, "On the Optimization of Superplastic Blow-Forming Processes," Journal of Materials Engineering and Performance, vol. 4, no. 4, pp. 474-485
  14. M. K. Khraisheh, A. E. Bayoumi, C. H. Hamilton, H. M. Zbib and K. Zhang, 1995, " Experimental Observations of Induced Anisotropy during the Torsion of Superplastic Pb-Sn Eutectic Alloy," Scipta Met. et Mater, vol. 32, no. 7, pp. 955-959
  15. M. K. Khraisheh, C. Pezeshki and A. E. Bayoumi, 1995, ''Time Series-Based Analysis for Primary Chatter in Metal Cutting,” Journal of Sound and Vibration, vol. 180, no. 1, p. 67
  16. A. E. Bayoumi, G. Yucesan and L. A. Kendall, August 1994, "An Analytic Mechanistic Cutting Force Model for Milling Operations: A Theory and Methodology," Trans. ASME-Journal of Engineering for industry, vol. 116, no. 3, pp. 324-330
  17. K. Zhang, M. K. Khraisheh, A. E. Bayoumi, C. H. Hamilton and H. M. Zbib, 1994, ”Anisotropy and Transient Effects in Superplastic Deformation,” Materials Science Forum, vol. 170-172, pp. 583-588
  18. A. E. Bayoumi, G. Yucesan and L. A. Kendall, August 1994, "An Analytic Cutting Force Model: A Case Study of Helical End Milling Operations," Trans. ASME-Journal of Engineering for Industry, vol. 116, no.3, pp. 331-339
  19. J. M. Park, R. V. Subramanian and A. E. Bayoumi, 1994, "Interfacial Shear Strength and Durability Improvement by Silanes in Single Filament Composites Specimens of Basalt Fiber in Brittle Phenolic and Isocyanate Resins," J. Adhesion Science and Technology, vol. 8, no. 2, pp. 133-150
  20. A. E. Bayoumi, G. Yucesan and D. V. Hutton, 1993, "On the Closed Form Mechanistic Modeling of Milling: Specific Cutting Energy, Torque and Power," Journal of Materials Engineering and Performance, vol.3, no. 4, pp. 151- 158
  21. A. E. Bayoumi, S. Barnwal and D. V. Hutton, 1993, "Prediction of Flank Wear and Engagements from Force Measurements in End Milling Operations," Intl. J. Wear, vol. 170, pp.255-266
  22. G. Yucesan, Q. Xie and A. E. Bayoumi, 1993, "Determination of Process Parameters through A Mechanistic Force Model of Milling Operations," Int. J. of Mach. Tools Manufacturing, vol. 33, no. 4, pp. 627-641
  23. R. B. Joshi, A. E. Bayoumi and H. M. Zbib, 1992, "The Use of Digital Image Processing in Studying Stretch Forming Sheet Metal," J. Experimental Mechanics, vol. 32, no. 2, pp. 117 123
  24. A. E. Bayoumi and R. B. Joshi, 1992, "On the Instability/Formability of Stretch Forming Sheet Metals," Appl. Mechanics Reviews, vol.45, no.3, part 2, pp. 154-164, 1992
  25. R. B. Joshi, A. E. Bayoumi and H. M. Zbib, "On Flow Localization of Stretch Forming Sheet Metals," Trans. NAMRI SME, vol. XX, pp. 61 66
  26. T. M. Teitenberg, A. E. Bayoumi and G. Yucesan, 1992, "Tool Wear Modeling through An Analytic Mechanistic Model of Milling Processes," Intl. J. WEAR, 154, pp. 287-304
  27. A. E. Bayoumi, R. B. Joshi and H. M. Zbib, 1991, "An Investigation of Finite Deformation and Shear Banding: Theory and Experiment," Appl. Mechanics Reviews, vol.44, no.11, pt 2
  28. A. E. Bayoumi, Q. Xie and M. N. Hamdan, 1991, "Effect of Cutting Conditions on Dynamic Properties and Surface Integrity of Work Materials," Int. J. Wear, 146, pp. 301-312
  29. Y. Wang, A. E. Bayoumi and H. M. Zbib, 1991, "An Experimental/Analytical Approach to Study Formability of Sheet Metals using a Punch Test," J. Materials Shaping Technology, Vol. 9, No. 3, pp. 143-152
  30. R. B. Joshi, A. E. Bayoumi and H. M. Zbib, 1990, "Evaluation of Macroscopic Shear Banding Using A Digital Image Processing Technique," Scripta Metallurgica et Materialia, Vol. 24, No. 9, pp. 1747-1752
  31. Q. Xie, A. E. Bayoumi and L. A. Kendall, 1990, "On the Tool Wear and Its Effect on Machined Surface Integrity," J. Materials Shaping Technology, Vol. 8, No. 4, pp. 255-265
  32. G. Yucesan, A. E. Bayoumi and L. A. Kendall, 1990, "An Analytic Mechanical Model for Milling Operations," Trans. NAMRI SME, vol. XVIII, pp. 137-145
  33. Brown, G. L. Sheldon and A. E. Bayoumi, 1990, "A Parametric Study on Improving Tool Life by Electrospark Deposition," Int. J. WEAR, 138, pp. 137-151
  34. D. Ma, W. E. Johns, A. K. Dunker and A. E. Bayoumi, 1990, "The Effect of Donor Acceptor Interactions on Mechanical Properties of Wood," J. of Adhesion Sci. and Tech., Vol. 4, No. 5, pp. 411-429
  35. Q. Xie, A. E. Bayoumi, L. A. Kendall and G. L. Sheldon, 1989, "A Study on Residual Stresses and Tool Wear in Machining," Trans. NAMRC, vol. XVII, pp. 170-174
  36. M. N. Hamdan and A. E. Bayoumi, 1989, "An Approach to Study the Effects of Tool Geometry on the Primary Chatter Vibration in Orthogonal Cutting," J. Sound and Vibration, Vol. 128, No. 1, pp. 451-469
  37. A. E. Bayoumi and N. Hamdan, 1988, "Characterization of Dynamic Flow Stress/Strain Properties Through Machining Tests," J. Manufacturing Review, Vol. 1, No. 2, pp. 130-135
  38. A. E. Bayoumi, J. S. Stewart and J. A. Bailey, 1988, "The Effects of Composition on Corrosion and Wear Rates of Cemented Carbide Blades in Planning Green Wood," J. Wood and Fiber Sci., Vol. 20, No. 4, pp. 457-476
  39. A. E. Bayoumi and L. A. Kendall, 1988, "Modeling and Measurement of Wear of Coated and Uncoated High Speed Steel End Mills," J. Materials Shaping Tech., Vol. 6, No. 1, pp. 19-29
  40. A. E. Bayoumi and H. Frank, 1988, "Formability Study of 2090 Al Li Alloy," Trans. NAMRI SME, vol. XVI, pp. 150-158
  41. L. A. Kendall and A. E. Bayoumi, 1988, "Automated Tool Wear Monitoring and Tool Changing using Intelligent Supervisory Control," Int. J. Prod. Res., Vol. 26, No. 10, pp. 1619-1628
  42. H. Frank and A. E. Bayoumi, 1987, "Plastic Instability Study of 70/30 Cartridge Brass through a Computerized Method," Trans. NAMRI, vol. XV, pp. 324-329
  43. A. E. Bayoumi and H. Frank, 1987, "An Investigation of Stretch Formability and Plastic Instability through a New Computerized Testing Method," in Recent Developments in Production Research, ed. A. Mital, Elsevier Science Publishers, Amsterdam, The Netherlands
  44. L. A. Kendall and A. E. Bayoumi, 1987, "Automation of a Machining Cell: Intelligent Supervisory Control," in Recent Developments in Production Research, ed. A. Mital, Elsevier Science Publishers, Amsterdam, the Netherlands
  45. S. B. Billatos, A. E. Bayoumi, L. Alden Kendall and S. Saunders, 1986, "A Statistical Wear Model for Certain Tool Materials with Applications to Machining," Int. J. WEAR, 112, 257
  46. A. E. Bayoumi, H. Frank, D. Hewett and G. Sheldon, 1986, "A Computer Aided Application in Stretch Forming," Trans. NAMRI SME, vol. XIV, pp. 379-387
  47. A. E. Bayoumi and J. A. Bailey, 1985, "The Role of Chemical Composition and Tool Geometry in Controlling Surface Roughness," Int. J. WEAR, 103, 311
  48. E. Bayoumi and J. A. Bailey, 1985, "Comparison of the Wear Resistance of Selected Steels and Cemented Carbide Cutting Tool Materials in Machining," Int. J. WEAR, 105, 131
  49. A. E. Bayoumi and J. A. Bailey, 1985, "New Concepts of Cutting Tool Wear Mechanisms in Machining," in Use of New Technology to Improve Mechanical Readiness, Reliability, and Maintainability, ed. T. Robert Shives, Cambridge University Press, New York, pp. 224-237
  50. A. E. Bayoumi and H. Conrad, 1985, "The Effects of Material Parameters on Stretch Formability in Uniaxial Tension in 3003 0 Al Alloy," Trans. NAMRI SME, vol. XIII, p. 266
  51. A. E. Bayoumi and J. A. Bailey, 1984, "Analytical and Experimental Study of Wear of Cemented Carbide in the Presence of Dilute Organic Acids," WEAR, 94, 29
  52. A. E. Bayoumi, J. A. Bailey and J. S. Stewart, 1983, "Comparison of the Wear Resistance of Various Grades of Cemented Carbides that may Find Application in Wood Machining," Int. J. WEAR, 89, 185
  53. J. A. Bailey, A. E. Bayoumi and J. S. Stewart, 1983, "Wear of Some Cemented Tungsten Carbide Tools in Machining Oak," Int. J. WEAR, 85, 69

Refereed Conference Papers and Presentations:

  1. Micro-Electro-Mechanical-Systems (MEMS) for Medical Applications, Keynote Speech, Proceedings of the 8th International Conference in Design and Production, Cairo, Egypt, January 2-4, 2004
  2. Mechanical Diagnosis and Prognosis of Military Aircrafts: A Scientific Approach,” The Annual American Helicopter Society Meeting, Virginia Peach, Virginia, October 2003
  3. Nuclear Engineering Education at University of South Carolina,” The Annual American Nuclear Society Meeting, Chicago, Illinois, March 2004
  4. V. Giurgiutiu, A.E. Bayoumi, “Mechatronics and Smart Structures: Emerging Engineering Disciplines for the Next Millennium, Paper # M2000-002, 7th Mechatronics Forum International Conference, Atlanta, GA, September, 2002
  5. M. K. Khraisheh, A. E. Bayoumi and S. Barnwal, “On the Mechanics Hole Making using an End-Mill Cutter,” Proceedings of the Society of Engineering Science, September 2001
  6. M. K. Khraisheh and A. E. Bayoumi, “On the Mechanistic Modeling of Cutting Forces of Milling Operations: A Control Algorithm,” NAMR Conference, 2001
  7. X. Deng, C. Shet, and A. E. Bayoumi, "A Finite Element Study of Waterjet Assisted Orthogonal Cutting,” Proceedings of the 37th Society of Engineering Science Annual Technical Meeting (SES 2000), University of South Carolina, Columbia, SC, October 2001
  8. G. Yucesan, J. Khan, and A. E. Bayoumi, “A Least Square Parameter Estimation Algorithm for Investigation of the Clearance Rubbing in Helical End Milling,” Proceedings of the 37th Society of Engineering Science Annual Technical Meeting (SES 2000), University of South Carolina, Columbia, SC, October 2000
  9. G. Yucesan, J. Khan, and A. E. Bayoumi, “The Effect of Feed Rate and Rake Angle on Clearance Rubbing in Helical End Milling of Ti6Al4V,” Proceedings of the 37th Society of Engineering Science Annual Technical Meeting (SES 2000), University of South Carolina, Columbia, SC, October 2000
  10. M. K. Khraisheh, A. E. Bayoumi, and S. Barnwal, “On the Mechanistic Modeling of Cutting Forces of Milling Operations: Hole Making using an End-Mill Cutter,” NAMR 1999
  11. C. H. Hamilton, H. M. Zbib and A. E. Bayoumi, " Mechanical Characterization and Constitutive Modeling for Superplastic Forming Processes: Theory and Applications," The 1995 NSF Design and Manufacturing Grantee Conference, January 4-6, 1995
  12. Q. Xie, A. E. Bayoumi and H. M. Zbib, "Characterization of Chip Formation and Shear Banding in Orthogonal Machining Using Finite Element Analysis," International Mechanical Engineering Congress and Exposition, Chicago Ill., AMD-Vol. 183, MD – Vol. 50, 1994
  13. K. Zhang, M. K. Khraisheh, A. E. Bayoumi, C. H. Hamilton and H. M. Zbib," Anisotropy and Transient Effects in Superplastic Deformation," Proceedings of the ICSAM, Moscow, Russia, May 23-25, 1994
  14. M. K. Khraisheh, A. E. Bayoumi, C. H. Hamilton and H. M. Zbib, "Multiaxial Deformation of Superplastic Materials," The 1994 NSF Design and Manufacturing Grantee Conference, Cambridge Massachusetts, January 5-7, 1994
  15. K. Zhang, M. K. Khraisheh, A. E. Bayoumi, C. H. Hamilton, A. E. Bayoumi and H. M. Zbib, "Mechanical Characterization of Superplastic Materials using Tension/Torsion Methods, The 1994 NSF Design and Manufacturing Grantee Conference, Cambridge Massachusetts, January 5-7, 1994
  16. X. D. Ding, H. M. Zbib, C. H. Hamilton and A. E. Bayoumi, " On the Stability of Superplastic Forming Processes, The 1994 NSF Design and Manufacturing Grantee Conference, Cambridge Massachusetts, January 5-7, 1994
  17. A. E. Bayoumi, "On the Formability/Instability Experimental Mechanics of Sheet Metal Forming," The 22nd Midwestern Mechanics Conference, 1991
  18. R. B. Joshi, A. E. Bayoumi, and H. M. Zbib, "An Investigation on the Instability of Plastic Flow using A Digital Image Processing Technique," The Eleventh U.S. National Congress of Applied Mechanics, 1990
  19. G. L. Sheldon, A. E. Bayoumi and A. R. Brown, "A Parametric Study on Improving Tool Life by Elctrospark Deposition," Proc. Intl. Conf. WEAR, 1989
  20. A. E. Bayoumi and Q. Xie, "A Study on Machined Subsurface and Tool Wear," Proc. Intl. Conf. Prod. Research, Nottingham, United Kingdom, 1989
  21. A. E. Bayoumi and S. Wojcicki, "Chemical Furnace Synthesis of Cutting Tool Materials based on Tungsten Carbide Ceramics," Second Topical Conference on Emerging Technologies in Materials; Amer. Inst. of Chemical Engineers, San Francisco, 1989
  22. L. A. Kendall and A. E. Bayoumi, "Automation of a Machining Cell: Intelligent Supervisory Control," Proc. Intl. Conf. Prod. Research, Cincinnati, Ohio, 1987
  23. A. E. Bayoumi and H. Frank, "Investigation of Stretch Forming and Plastic Instability through a New Computerized Experimental System," Proc. Intl. Conf. Prod. Research, Cincinnati, Ohio, 1987
  24. A. E. Bayoumi and L. A. Kendall, "Automation of a Machining Cell through Physical Modeling of Tool Wear," Proc. International Conference on "Strategies for Automation of Machining Materials and Processes,ASM Intl” Orlando, Fl, 1987
  25. A. E. Bayoumi and D. M. Weatherhead, "A New Concept Increment Core Borer," American Society of Agricultural Engineers, No. 84, p. 1621, 1984
  26. A. E. Bayoumi, "Layout Optimization of Factories," National Planning Institute, Cairo, Egypt, July 1977

Non-Refereed Conference Papers and Presentations:

  1. A. E. Bayoumi, R. B. Joshi and H. M. Zbib, "An Investigation of Localized Deformation using A Digital Image Processing Technique," The PACAM II, Congress of Applied Mechanics, Chile, 1990
  2. J. W. Roedell, P. G. Vaidya and A. E. Bayoumi, "Experimental Determination of the Speed of Sound in Solids using Impact Loading," Acoustical Society of America, San Diego, California, November, 1990
  3. R. Arshad, A. E. Bayoumi and W. L. Grosshandler, “A Study on Heat Generation in an End-milling Operations," Proc. Heat Transfer, ASME-WAM, 1989
  4. Brown, G. L. Sheldon and A. E. Bayoumi, 1988, "Extension of Metal Cutting Tool Life by Electrospark Alloying," Surface Modification Technologies. Second International Conference of TMS, Chicago, Illinois
  5. A. E. Bayoumi, "A Computerized Experimental Method for Solving Problems in Plastic Instability," The Tenth U.S. National Congress of Applied Mechanics, 1986
  6. A. E. Bayoumi and J. A. Bailey, "New Concepts of Cutting Tool Wear Mechanisms in Machining," 40th Meeting of the MFPG, April 1985

Invited Conference Presentations:

  1. Mechanical Diagnosis and Prognosis of Military Aircrafts: A Scientific Approach,” The Annual American Helicopter Society Meeting, Virginia Peach, Virginia, October 2003
  2. Nuclear Engineering Education at University of South Carolina,” The Annual American Nuclear Society Meeting, Chicago, Illinois, March 2004
  3. Recent Trends on Manufacturing Education Keynote Lecture, the 35th Annual Technical Meeting of the Society of Engineering Science, September, 1998
  4. On the Formability/Instability Experimental Mechanics of Sheet Metal Forming, The 22nd Midwestern Mechanics Conference, Missouri Rolla, 1991
  5. Extension of Metal Cutting Tool Life by Electrospark Alloying, Surface Modification Technologies III: Second International Conference of TMS, Chicago, Illinois, 1988
  6. A Parametric Study on Improving Tool Life by Electrospark Deposition, Intl. Conf. WEAR, Denver, Colorado, 1988
  7. Cutting forces and power consumption versus tool life in cutting operations, The 40th Forest Products Research Society, Spokane, Washington, 1986
  8. A New Concept Increment Core Borer, American Society of Agricultural Engineers, New Orleans, Louisiana, 1984

Invited Seminars & Keynotes:

  1. Micro-Electro-Mechanical-Systems (MEMS) for Medical Applications, Keynote Speech, the 8th International Conference in Design and Production, Cairo, Egypt, January 2-4, 2004
  2. Machinery Prognosis and Diagnosis, An Annual Scholars’ Lecture, Egyptian National Academy of Science and Technology, Cairo, Egypt, Dec. 1999
  3. Smart Structures and Sensing of Composite Materials, Egyptian National Academy of Science and Technology, Cairo, Egypt, Dec. 1998
  4. Health Monitoring and Damage Prevention in Composite Materials and Structures, Cairo University, Cairo, Egypt, Dec. 1998
  5. Design for manufacture and assembly of heavy equipment, John Deere Company, Charlotte, North Carolina, 1997
  6. Design of mechatronics components, Caterpillar Company, Clayton, NC, 1997
  7. A mechanistic approach for the development of an intelligent supervisory controller of manufacturing operations, Department of Industrial Engineering, North Carolina State University, Raleigh, North Carolina, 1997
  8. The use of digital image processing in characterizing superplastic forming of hard materials, Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina, 1997
  9. Mechanistic modeling of milling operation for the purpose of automation, Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, North Carolina, 1995
  10. An Integrated Approach on the Development of an Intelligent Machining System: Process, Materials, Mechanics and Control, Department Of Mechanical, Aerospace and Manufacturing Engineering, Syracuse University, NY, 1995
  11. Machine Vision and Concurrent Engineering in Electronics Manufacturing, Hewlett-Packard, Vancouver Division, Vancouver, Washington, 1993
  12. On the Concepts of Machining Processes: From Mechanics to Automation, Corporate Technology Center, Kennametal Inc., Latrobe, Pennsylvania, 1993
  13. An Integrated Approach to Manufacturing Processes: Design, materials and Process Selection, Department of Manufacturing Engineering, Boston University, 1993
  14. Concurrent Engineering; the Trend of Manufacturing Engineering Education, Department of Mechanical Engineering, Oregon State University, 1992
  15. The World Trends of Manufacturing Systems and Manufacturing Research, Department of Mechanical Engineering, SUNY-Stony Brook, 1992
  16. Efficient Use of Computer in Solving Problems of Production and Design, Egyptian Society of Engineers, Cairo, Egypt, 1992
  17. The Use of Digital Image Processing in Metal Forming, The American University in Cairo, Egypt, 1991
  18. Manufacturing Processes Research at Washington State University, Department of Mechanical Engineering, University of Victoria, British Colombia, Canada, 1991
  19. Intelligent Machining Systems: Modeling and Control, Department of Mechanical Engineering, University of New Mexico, Albuquerque, NM, 1991
  20. Manufacturing Problems, Education and Research: A Personal View, Department of Mechanical Engineering, San Jose State University, San Jose, CA, 1991
  21. A Physical and Mechanistic Milling Model for an Untended Machining Systems, The Sibley School of Mech. and Aerospace Engineering, Cornell University, Itheca, NY, 1990
  22. Manufacturing, Materials and Thermo Fluids Research Trends at Washington State University, Dept. Mechanical Engineering, Menoufia University, Egypt, 1990
  23. Computer Integrated Manufacturing A Case Study, Faculty of Engineering, Cairo University, Cairo, Egypt, 1988
  24. Manufacturing Research Activities at Washington State University, College of Engineering, University of Idaho, Moscow, ID, 1986
  25. Technology of Metal Forming and Formability, Omark Industries, Lewiston, ID, 1985
  26. How to Increase Productivity through the Improvements of Tool Life, Newman Machine Tool Company, Greensboro, NC, 1983
  27. An Experimental and Analytical Investigation of Tool Wear in Machining Processes, Mechanical Engineering, Washington State University, Pullman, WA, 1983
  28. A Tribological Investigation in Machining Processes and Tool Wear, Mechanical Engineering and Engineering Mechanics, MTU, Houghton, MI, 1983

Final Project Reports:

  1. A. E. Bayoumi," The Use of Air-Abrasive Jet in Dentistry Applications," Kreativ, Inc., Albany, OR, 1998
  2. A. E. Bayoumi," The Use of Air-Abrasive Jet in Dentistry Applications," Kreativ, Inc., Albany, OR, 1997
  3. A. E. Bayoumi," Intelligent Machining Systems," Boeing Commercial Airplane Company, Seattle, WA, 1991- 1995
  4. L. A. Kendall and A. E. Bayoumi, "Intelligent Supervisory Controller: Phase Three," Boeing Co., 1989
  5. A. E. Bayoumi, "Formability of AL-Li Alloys and Other Al. Alloys," Boeing Company, Seattle, WA, 1989
  6. A. E. Bayoumi and L. A. Kendall, "Physical Machinability Models for Machining Systems," Boeing Commercial Airplane Company, Seattle, WA, 1987
  7. A. E. Bayoumi and M. Hickman, "Wood Cutter Tool Wear; Tool Life vs. Forces and Power Consumption," Newman-Whiteny Machine Tool Company, Greensboro, NC, 1986
  8. A. E. Bayoumi and R. Patton, "Acceleration Measurements of Powered Actuated Tools using Stroboscopic Photography," Omark Industries, Lewiston, ID, 1986
  9. A. E. Bayoumi and L. A. Kendall, "Cutting Tool Reliability and Tool Wear Analysis," Boeing Commercial Airplane Company, Seattle, WA, 1986
  10. A. E. Bayoumi and H. Conrad, "A Fundamental Study of the Influence of Material Parameters on the Formability of Aluminum Alloys," ALCOA, 1983
  11. J. A. Bailey and A. E. Bayoumi, "A Study of the Wear Characteristics of Cemented Tungsten Carbide Cutting Tools," Progress Reports I through V, Newman Machine Tool Company, Greensboro, NC, 1981-1982
  12. C. F. Zorowski, A. E. Bayoumi and M. Caliskan, "Design and Construction of a Complete Mechanical Scaffolding System for Maintaining Bridges in the State of North Carolina," Department of Transportation, Raleigh, NC, 1980

BOOKS

  1. A. E. Bayoumi and L. A. Kendall, "Manufacturing Processes - A Laboratory Book," Washington State University Students Book Corporation, Pullman, Washington, 1989
  2. A. E. Bayoumi, "Engineering Drawing and Descriptive Geometry - A Freshman Textbook," Faculty of Engineering and Technology, Tanta University, Egypt, 1975

LINKS
MECHANICAL ENGINEERING
USC LINKS: DIRECTORY MAP EVENTS VIP
SITE INFORMATION
300 Main Street • Columbia, SC 29208 • 803-777-4185 • FAX 803-777-0106 • Webmaster © University of South Carolina Board of Trustees