Biography | Research | Teaching | Publications | Contact | Home

PUBLICATIONS

  • Book Chapters

  1. Ohadi, M.M., Darabi, J., and Roget, B., 2001, "Electrode Design, Fabrication, and Materials Science for EHD-Enhanced Heat and Mass Transport," Annual Review of Heat Transfer, Vol. XI, pp. 563-632, Edited by C.L. Tien, Begell House, New York.

  2. Ohadi, M.M., Dessiatoun, S.V., Darabi, J. and Salehi, M., 1996, " Active Augmentation of Single-Phase and Phase-Change Heat Transfer," Process, Enhanced and Multi phase Heat Transfer, pp. 277-286, Eds. R.M. Manglik and A.D. Kraus, Begell House, New York.

  • Archival Journals

  1. Sen, A K, Darabi, J, D R Knapp, 2006, Simulation and parametric study of a novel multi-spray emitter for ESI- MS applications, Microfluidics and Nanofluidics,Vol.122. [download]

  2. Darabi, J. and Rhodes, C., 2006, CFD Modeling of an Ion-Drag Micropump, Journal of Sensors and Actuators A, 127 (2006) 94-103. [download]

  3. Sen, A K., J. Darabi, D. R. Knapp and J. Liu, Modeling and characterization of a carbon fiber emitter for electrospray ionization, J. Micromech. Microeng. 16 (2006) 620-630. [download]

  4. Darabi, J. and Wang, H., 2005, “Development of an Electrohydrodynamic Injection Micropump and Its Potential Application in Pumping Fluids in Cryogenic Cooling Systems," Journal of Microelectromechanical Systems, Vol. 14, No. 4, pp. 747-755. [download]

  5. Ghajar, M. and Darabi, J., 2005, “Numerical Modeling of Evaporator Surface Temperature of a Micro Loop Heat Pipe at Steady-state Condition,” J. Micromech. Microeng. 15, 1963-1971. [download]

  6. Ghajar, M., Darabi, J., and Crews, N., 2005, “A Hybrid CFD-Mathematical Model for Simulation of a MEMS Loop Heat Pipe for electronics cooling applications,” J. Micromech. Microeng. 15, 313-321.

  7. Darabi. J., 2004, “An Analytical Model for EHD-enhanced Microscale Thin-film Evaporation,” International Journal of Heat Transfer Engineering, Vol. 24, No. 6, pp.14-22.

  8. Darabi, J., and K. Ekula, 2003 “Development of a Chip-integrated Micro Cooling device,” Microelectronics Journal, Vol. 34, pp. 1067–1074. [download]

  9. Darabi, J., Rada, M., Ohadi, M.M. and Lawler, J., 2002, "Design, Fabrication, and Testing of an Electrohydrodynamic Ion-Drag Micropump," Journal of Microelectromechanical Systems, Vol. 11. N0. 6, pp. 684-690. [download]

  10. Darabi, J., 2002, "Micro- and Nanoscale Heat transfer: Challenges and Opportunities," International Journal of Heat Transfer Engineering, Editorial, Vol. 23, pp.1-2.

  11. Darabi, J., Ohadi, M.M., and DeVoe, D., 2001, "An Electrohydrodynamic Polarization Micropump for Electronic Cooling," Journal of Microelectromechanical Systems, Vol. 10, No. 1, pp. 98-106. [download]

  12. Darabi, J., Ohadi, M.M., and Dessiatoun, S. V., 2000, "Falling Film and Spray Evaporation Using Electric Fields," Journal of Heat Transfer, Vol. 122, No. 4, pp. 741-748.

  13. Darabi, J., Ohadi, M.M., and Dessiatoun, S.V.,2000, "Compound Augmentation of Pool Boiling on Three Selected Commercial Tubes," Journal of Enhanced Heat Transfer, Vol. 7, pp. 347-360.

  14. Darabi, J., Ohadi, M.M., and Dessiatoun, S. V., 2000, "Augmentation of Thin Falling-Film Evaporation on Horizontal Tubes Using an Applied Electric Field," Journal of Heat Transfer, Vol. 122, No.2, pp. 391-398.

  15. Darabi, J., Ohadi, M.M., Faani, M.A., and Kedzierski, M.,1999 "Effect of Heating Boundary Conditions on Pool Boiling Experiments," International Journal of HVAC&R Research, Vol. 5, No. 4, pp. 283-296.

  16. Darabi, J., Salehi, M., Saeedi M.H., and Ohadi, M.M., 1995, "Review of available correlations for prediction of flow boiling heat transfer in smooth and augmented tubes," ASHRAE Transaction, Vol. 101, Part 1, pp.225-235.

  • Peer- Reviewed Conference Papers

  1. Ghajar, M and Darabi J, Integration of A Thin-Film Evaporation Submodel With a Micro Loop Heat Pipe Solver, 2006 ASME International Mechanical Engineering Congress, IMECE2006-14730, Chicago, Illinois, November 5-10, 2006.

  2. Sen, A K, Darabi, J, and Knapp D R., Modeling of a Novel Multi-Jet Emitter for ESI-MS Applications, 2006 ASME International Mechanical Engineering Congress, IMECE2006-14401, Chicago, Illinois, November 5-10, 2006.

  3. Floyd, D.E., Topolski. M.T., and Darabi, J., Design and Evaluation of Copper Metal Foams in Cold Plates, 2006 ASME International Mechanical Engineering Congress, IMECE2006-14897, Chicago, Illinois, November 5-10, 2006.

  4. Sen, K., J. Darabi, D. R. Knapp, EHD Modeling of A Novel Carbon Fiber Emitter For Electrospray Ionization-Mass Spectrometry Applications, 2006 Summer Bioengineering Conference, Proceedings of BIO2006, June 21-25, Amelia Island Plantation, Amelia Island, Florida, USA

  5. Ghajar, M. and Darabi, J., “Simulation of Steady State Surface Temperature Response of A Novel Micro Loop Heat Pipe To Various Heat Loads,” 2005 ASME Summer Heat Transfer Conference, July 17-22, 2005, San Francisco, California.

  6. Ghajar, M., Darabi, J., and Crews, N., 2004, “A Hybrid CFD-Mathematical Model for Simulation of a MEMS Loop Heat Pipe, 2004 ASME International Mechanical Engineering Congress, IMECE2004-61516, Anaheim, California, November 13-19, 2004.

  7. Bayoumi, A. and Darabi, J, “The Use of MEMS/NEMS Technology for Biomedical Applications,” Proceeding of MDP-8, Cairo University Conference on Mechanical Design and Production, Cairo, Egypt, January 4-6, 2004.

  8. Darabi, J., Wang, H., 2003, “Development of an Electrohydrodynamic Injection Micropump for Cryogenic Cooling," Paper # 44247, Proceedings of IMECE2003 ASME International Mechanical Engineering Congress & Exposition, Washington, D.C.

  9. Darabi, J., Chowdhury, S., Ohadi, M.M., Lawler, J., 2003, “A Source-Integrated Micro Cooling System,” Proceedings of the 6th ASME-JSME Thermal Engineering Joint Conference,” TED-AJ03-131, March 16-20, 2003, Hawaii Island, Hawaii.

  10. Darabi, J., Wang, H., 2002, "Emerging Opportunities and Challenges in Micropumps," Proceedings of IMECE2002 ASME International Mechanical Engineering Congress & Exposition, IMECE2002-39586.

  11. Chowdhury, S., Darabi, J., Ohadi, M.M., and Lawler J., 2002, "Chip-integrated Micro Cooling Systems," Proceedings of the Thermal Challenges in Next Generation Electronic Systems Conference, Santa Fe, New Mexico.

  12. Rada, M., Darabi, J., Ohadi, M.M., and J. Lawler, 2001, "Electrohydrodynamic Pumping of Liquid Nitrogen using a mesoscale ion-drag pump," Proceedings of the 36th Intersociety Energy Conversion Engineering Conference, Savannah, GA.

  13. Darabi, J., Ohadi, M.M., and Dessiatoun, S.V., 1999 "Augmentation of Thin Falling-Film Evaporation on Horizontal Tubes Using an Applied Electric Field," Compact Heat exchangers and Enhancement technology for the Process Industries Conference, July 18 - 22, 1999, Banff, Canada.

  14. Ohadi, M.M., and Dessiatoun, S. V, Darabi, J., and Baumgarten, B., 1999, "High Temperature Heat Exchangres--Emerging Opportunities and Challenges," Proceedings, 2nd Int. High Temperature Air Combustion (HTAC) Symposium, January 20-22, 1999, Kaohsiung, Taiwan, Paper No. A-2, PP. A2-1-A2-10

  15. Darabi, J., Ohadi, M.M., and Dessiatoun, S.V., 1999, "Falling Film and Spray Evaporation Enhancement Using Electric Fields," Proceedings of the 5th ASME/JSME Joint Thermal Engineering Conference, San Diego, CA, AJTE99-6248.

  16. Zhao, Y., Ohadi, M.M., Dessiatoun, S.V., and Darabi, J., 1999, "Forced Convection Heat Transfer of CO2 in Horizontal Tubes," Proceedings of the 5th ASME/JSME Joint Thermal Engineering Conference, San Diego, CA, AJTE99-6249.

  17. Darabi, J., Ohadi, M.M., and Dessiatoun, S.V., 1998, "Heat Transfer Enhancement with Falling Film Evaporation on Vertical Tubes Using Electric Fields," Proceedings of the International Mechanical Engineering Congress and Exposition, HTD-361-1, Vol.1, pp. 331-38.

  18. Zhao, Y., Ohadi, M.M, Dessiatoun, S.V., Schuster, A., McNair, A., Radermacher, R., and Darabi, J., 1997, "Evaporation Heat Transfer Coefficients of Ammonia and Co2 Inside a Smooth Tube" International conference on Heat Transfer issues in Natural refrigerants, November 6 and 7, pp. 93-107.

TECHNICAL REPORTS

  1. Darabi, J., Ohadi, M.M., and Dessiatoun, S.V., 1996a-c, "Characterization of the EHD Technique for Industrial Chiller Applications," Progress reports No. 1, 2, and 3, Prepared for the Trane Company.

  2. Darabi, J., Ohadi, M.M., and Dessiatoun, S.V., "Characterization of the EHD Technique for Industrial Chiller Applications," Final report, Prepared for the Trane Company, May 1997.

  3. Darabi, J., Ohadi, M.M., and Dessiatoun, S. V., 1997, "Fundamentals of Falling Film Evaporation," EHD Enhancement of Boiling/ Condensation Heat Transfer of Alternative Refrigerants," Report No. II-3, Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland, June 1997, pp. 96-117.

  4. Sullivan, M, Darabi, J., Ohadi, M., and Dessiatoun, S., 1997, "EHD-Assisted DX Condenser Prototype," in EHD Enhancement of Boiling/Condensation Heat Transfer of Alternative Refrigerants," Report No. II-3, Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland, June 1997, pp. 62-76.

  5. Darabi, J., Ohadi, M., and Dessiatoun, S., 1997, "EHD-Assisted Falling Film Evaporation Experiments on Horizontal Tubes," EHD Enhancement of Boiling/ Condensation Heat Transfer of Alternative Refrigerants," Report No. II-4, Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland, October 1997, pp. 5-21.

  6. Darabi, J., Ohadi, M., and Dessiatoun, S., 1998, "EHD-Enhanced Falling Film Evaporation," EHD Enhancement of Boiling/ Condensation Heat Transfer of Alternative Refrigerants," Report No. II-5, Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland, January 1998, pp. 145-167.

  7. Sullivan, M, Darabi, J., Ohadi, M., and Dessiatoun, S., 1998, "EHD-Assisted Heat Exchanger Prototype," EHD Enhancement of Boiling/Condensation Heat Transfer of Alternative Refrigerants," Report No. II-5, Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland, January 1998, pp. 96-109.

  8. Darabi, J., Roget, B., Ohadi, M., Dessiatoun, S., and Molki, M., 1998, "Electrode Materials Science, Design, and Fabrication," EHD Enhancement of Single-Phase and Phase-Change Heat Transfer and Fluid Flow Characteristics, Report No. II-6, Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland, April 1998, pp. 5-30.

  9. Darabi, J., Roget, B., Ohadi, M., Dessiatoun, S., and Molki, M., 1998, "Electrode Materials Science, Design, and Fabrication," in EHD Enhancement of Single-Phase and Phase-Change Heat Transfer and Fluid Flow Characteristics, Report No. II-7, Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland, June 1998, pp. 82-134.

  10. Darabi, J., Ohadi, M., and Dessiatoun, V., 1998, "Development of an Active Heat Transfer Surface/Pumping Device Using MEMS Technology," EHD Enhancement of Single-Phase and Phase-Change Heat Transfer and Fluid Flow Characteristics, Report No. II-8, Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland, October 1998, pp. 131-38.

  11. Darabi, J., Roget, B., Ohadi, M., Dessiatoun, S., and Molki, M., 1998, "Electrode Materials Science, Design, and Fabrication," in EHD Enhancement of Single-Phase and Phase-Change Heat Transfer and Fluid Flow Characteristics, Report No. II-8, Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland, October 1998, pp. 42-98.

  12. Darabi, J., Ohadi, M., and Dessiatoun, S., 1999a-c, "Development of an Active Cooling Device Using MEMS Technology," EHD Enhancement of Single-Phase and Phase-Change Heat Transfer-Applications to Smart Heat Exchangers, Reports No. II-9,II-10, and II-11, Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland.