LABORATORY FOR ACTIVE MATERIALS AND SMART STRUCTURES

LAMSS Publications: Journals

Books | Conferences | Journals | Patents | Reports | Theses & Dissertations

Publication Years:   [2018] [2017] [2016][2015][2014][2013] [2012] [2011] [2010] [2009] [2008] [2007] [2006] [2005] [2004] [2003] [2002] [2001] [2000] [1999] [1998] [1997] [1996] [1995-1975]]

2018top

J119 Faisal Haider, Md.; Giurgiutiu, V. (2018) “A Helmholtz potential approach to the analysis of guided wave generation during acoustic emission events”, ASME Journal of Nondestructive Evaluation, Diagnostics, and Prognostics of Engineering Systems, Vol. 1, No. 2, May 2018, 1(2):021002-021002-11, DOI: 10.1115/1.4038116, pp. 1-11
Full paper

2017top

 J118 Bhuiyan, Md. Y.; Giurgiutiu, V. (2017) “Acoustic emission sensor effect and waveform evolution during fatigue crack growth in thin metallic plates”, Journal of Intelligent Material Systems and Structures, DOI: 10.1177/1045389X17730930 , pp. 1-10
Full paper

J117 Bhuiyan, Md. Y.; Giurgiutiu, V. (2017) “Multiphysics Simulation of Low-Amplitude Acoustic Wave Detection by Piezoelectric Wafer Active Sensors Validated by In-situ AE-Fatigue Experiment”, Materials, 2017, 10, 962, doi: 10.3390/ma10080962, www.mdpi.com/journal/materials
Full paper

J116 Smithard, J.; Rajic, N.; Velden, S.; Norman, P.; Rosalie, C.; Galea, S.; Mei, H.; Lin, B.; Giurgiutiu, V. (2017) “An Advanced Multi-Sensor Acousto-Ultrasonic Structural Health Monitoring System: Development and Aerospace DemonstrationMaterials, 2017, 10(7), 832; doi:10.3390/ma10070832
Full paper

J115 Faisal Haider Md.; Giurgiutiu, V.; Lin, B.; Yu, L. (2017) “Irreversibility Effects in Piezoelectric Wafer Active Sensors after Exposure to High Temperature”, Smart Materials and Structures¸ Vol. 26, No. 9, 095019 (14 pp) 9 August 2017, https://doi.org/10.1088/1361-665X/aa785f , DOI: 10.1088/1361-665X/aa785f
Full paper

J114 Poddar, B.; Giurgiutiu, V. (2017) “Detectability of Crack Length from Acoustic Emissions Using Physics of Wave Propagation in Plate Structures”, Journal of Nondestructive Evaluation, Vol. 36:41, June 2017, DOI: 10.1007/s10921-017-0392-x
Full paper

J113 Bhuiyan, Md Y; Bao, J; Poddar, B.; Giurgiutiu, V. (2017) "Towards identifying crack-length-related resonances in acoustic emission waveforms for structural health monitoring applications”, Structural Health Monitoring – International Journal, DOI: 10.1177/1475921717707356, May 2017
Full paper

J112 Barazanchy, D; Giurgiutiu, V. (2017) “A comparative convergence and accuracy study of composite guided-ultrasonic wave solution methods: comparing the unified analytic method (UAM), SAFE method, and DISPERSE”, Journal of Mechanical Engineering Science, Sage Publications, March 2017, doi: 10.1177/0954406217700928
Full paper

J111 Bhuiyan, Md Y; Shen, Y; Giurgiutiu, V (2017) “Interaction of Lamb waves with rivet hole cracks from multiple directions”, Proc IMechE Part C: J Mechanical Engineering Science , DOI: 10.1177/0954406216686996, March 2017
Full paper

2016top

J110 Barazanchy, D; Giurgiutiu, V (2016) “A unified formulation for predictive modeling of guided-ultrasonic wave dispersion curves in metallic and composite materialsJournal of Intelligent Material Systems and Structures, DOI: 10.1177/1045389X16667559, first published September 14, 2016
Full paper

J109 Poddar, B.; Giurgiutiu, V. (2016) “Complex modes expansion with vector projection using power flow to simulate Lamb waves scattering from horizontal cracks and disbonds”, Journal of the Acoustical Society of America, Vol. 140, No. 3, pp. 2123-2133, September 2016
Full paper

J108 Bhuiyan, M. Y.; Giurgiutiu, V. (2016) "Using the Gauge Condition to Simplify The Elastodynamic Analysis of Guided Wave Propagation”, INCAS Bulletin, Vol. 8, No. 3, pp 11-26, ISSN 2066-8201, http://bulletin.incas.ro/volume_8_issue_32016.html
Full paper

J107 Bhuiyan, M. Y.; Shen, Y.; Giurgiutiu, V. (2016) “Guided Wave Based Crack Detection in the Rivet Hole Using Global Analytical with Local FEM Approach”, Materials, 2016, Vol. 9, Issue 7, paper No. 602, doi:10.3390/ma9070602
Full paper

J106 Poddar, B.; Giurgiutiu, V. (2016) “Scattering of Lamb waves from a discontinuity: An improved analytical approach”, Wave Motion, Vol. 65 (2016), pp. 79-91
Full paper

J105 Shen, Y.; Giurgiutiu, V. (2016) “Combined analytical FEM approach for efficient simulation of Lamb wave damage detection”, Ultrasonics, Vol. 69, pp. 116-128
Full paper

J104 Frankforter, E.; Lin, B.; Giurgiutiu, V.(2016) “Characterization and optimization of an ultrasonic piezo-optical ring sensor”, Smart Materials and Structures, Volume 25, No. 4, April 2016, 045006
Full paper

J103 Giurgiutiu, V.; Postolache, C; Tudose, M. (2016) “Radiation, temperature, and vacuum effects on piezoelectric wafer active sensors”, Smart Materials and Structures, Volume 25, No. 3, March 2016, 035024
Full paper

2015top

J102  Kamas, T.; Giurgiutiu, V.; Lin, B. (2015) “E/M impedance modeling and experimentation for the piezoelectric wafer active sensor”, Smart Materials and Structures, Volume 24, Number 11, 115040
Full paper

J101  Kamas, T.; Giurgiutiu, V.; Lin, B. (2015) “Thickness mode EMIS of constrained proof-mass piezoelectric wafer active sensors”, Smart Materials and Structures, Volume 24, Number 11, 115035
Full paper

J100 Shen, Y.; Giurgiutiu, V. (2015) “Effective Non-reflective Boundary for Lamb Waves: Theory, Finite element Implementation, and Applications”, Wave Motion, Vol. 58, pp. 22-41
Full paper

J99 Glushkov, E.; Glushkova, N.; Eremin, A.; Giurgiutiu, V. (2015) “Low-cost Simulation of Guided Wave Propagation in Notched Plate-like Structures”, Journal of Sound and Vibration, May 2015, Vol. 352, pp. 80-91
Full paper

J98 Giurgiutiu, V.; Roman, C.; Lin, B.; Frankforter, E.; (2015) “Omnidirectional FBG Ring Sensor for Enhanced Guided Wave Structural Health Monitoring”, Smart Materials and Structures, 24, No. 1, #015008, January 2015, featured article http://iopscience.iop.org/0964-1726/page/Cover%20gallery
Full paper

2014top

J97 Lin, B.; Gresil, M.; Cuc, A.; Giurgiutiu, V. (2014) “Predictive Modeling of Piezoelectric Wafer Active Sensors for Structural Health MonitoringFerroelectrics, 470:1, 168-182, DOI: 10.1080/00150193.2014.923251
Full paper

J96 Gresil, M.; Giurgiutiu, V. (2014) “Prediction of attenuated guided waves propagation in carbon fiber composites using Rayleigh damping”, Journal of Intelligent Material Systems and Structures, online first 8 Sept. 2014, doi 1045389X14549870
Full paper

J95 Kamal, A.; Giurgiutiu, V. (2014) “Shear horizontal wave excitation and reception with shear horizontal piezoelectric wafer active sensor (SH-PWAS)Smart Materials and Structures, 23 085019 doi:10.1088/0964-1726/23/8/085019
Full paper

J94 Shen, Y.; Giurgiutiu, V. (2014) “WaveFormRevealer: An analytical framework and predictive tool for the simulation of multi-modal guided wave propagation and interaction with damageStructural Health Monitoring – An International Journal, Vol. 13, No. 5, pp. 491-511, online May 2014, doi: 10.1177/1475921714532986
Full paper

J93 Shen, Y.; Giurgiutiu, V. (2014) "Predictive Modeling of Nonlinear Wave Propagation for Structural Health Monitoring with Piezoelectric Wafer Active Sensors”, Journal of Intelligent Material Systems and Structures, Aug. 2013, DOI 10.1177/1045389X13500572, jim.sagepub.com, Jan 2014 in print Vol. 25, No. 4, pp. 506-520 
Full paper

J92 Kamal, A.; Lin, B.; Giurgiutiu, V. (2014) “Exact Analytical Modeling of Power and Energy for Multimode Lamb Waves Excited by Piezoelectric Wafer Active Sensors”, Journal of Intelligent Material Systems and Structures, first published on August 14, 2013 as doi:10.1177/1045389X13498310, Jan. 2014 in print Vol. 25, No. 4, pp. 452-471
Full paper

2013top

J91 Gresil, M.; Giurgiutiu, V. (2013) “Guided Wave Propagation in Composite Laminates Using Piezoelectric Wafer Active Sensors”, Aeronautical Journal, Oct. 2013, Vol. 117, No. 1196, pp. 971-995, Royal Aeronautical Society, London UK
Full paper

J90 Gresil, M.; Yu, L.; Shen, Y.; Giurgiutiu, V. (2013) “Predictive Model of Fatigue Crack Detection in Thick Bridge Steel Structures with Piezoelectric Wafer Active Sensors”, Smart Structures and Systems, Vol. 12, No. 2, pp. 001-635
Full paper

J89 Gresil, M; Giurgiutiu, V (2013) “Time-Domain Global-Local Prediction of Guided Waves Interaction with Damage”, Key Engineering Materials, Vol. 558 (2013), pp. 116-127
Full paper

J88 Gresil, M; Giurgiutiu, V (2013) “Time-Domain Hybrid Global-Local Concept for Guided-Wave Propagation with Piezoelectric Wafer Active Sensor”, Journal of Intelligent Material Systems and Structures, Vol. 24, No. 15, pp. 1897-1911, 2013, doi: 10.1177/1045389x13486712
Full Paper

2012top

J87 Yu, L.; Giurgiutiu, V. (2012) “Piezoelectric Wafer Active Sensors in Lamb Wave Based Structural Health Monitoring”, Journal of Materials, Springer, Vol.64, No.7, pp814-822
Full Paper

J86 Santoni-Bottai, G.; Giurgiutiu, V. (2012) “Exact Shear-lag Solution for Guided Waves Tuning with Piezoelectric Wafer Active Sensors”, AIAA Journal, Vol. 50, No. 11, November 2012. pp. 2285-2294
Full Paper

J85 Giurgiutiu, V. (2012) “Introduction to Structural Health Monitoring with Piezoelectric Wafer Active Sensors”, Welding and Material Testing, ISSN 1453-0392, year XXI, No. 2, 2012, pp. 15-20
Full paper

J84 Gresil, M.; Yu, L.; Giurgiutiu, V.; Sutton, M. (2012) “Predictive Modeling of Electromechanical Impedance Spectroscopy for Composite Materials”, Structural Health Monitoring an International Journal, Vol. 11, No. 6, pp. 671-683
Full paper

J83 Santoni-Bottai, G.; Giurgiutiu, V. (2012) “Damage Detection at Cryogenic Temperatures in Composites using Piezoelectric Wafer Active Sensors”, Structural Health Monitoring –; an International Journal, Vol. 11, online first 28 June 2012, doi:10.1177/1475921712442441
Full paper

J82 Giurgiutiu, V; Gresil, M; Lin, B; Cuc, A; Shen, Y; Roman, C (2012) “Predictive Modeling of Piezoelectric Wafer Active Sensors Interaction with High-frequency Structural Waves and Vibration”, Acta Mechanica, March 2012, No. 223, pp. 1681-1691, online first 10.1007/s00707-012-0633-0
Full paper

J81 Giurgiutiu, V; Soutis, C (2012) “Enhanced Composite Integrity through Structural Health Monitoring”, Applied Composite Materials, February 2012, online first DOI 10.1007/s10443-011-9247-2
Full paper

J80 Yu, L.; Giurgiutiu, V.; Wang, J.; Shin, Y-J (2012) “Corrosion Detection with Piezoelectric Wafer Active Sensors using Pitch-Catch Waves and Cross Time-Frequency Analysis”, Structural Health Monitoring – an International Journal, Vol. 11, No. 1, pp. 83-89, Jan 2012
Full paper

J79 Yu, L.; Momeni, S.; Godinez, V.; Giurgiutiu, V.; Ziehl, P.; Yu, J. (2012) “Dual Mode Sensing with Low-Profile Piezoelectric Thin Wafer Sensors for Steel Bridge Crack Detection and Diagnosis”, Advances in Civil Engineering, Vol. 2012, Article ID 402179, 2012, doi:10.1155/2012/402179
Full paper

J78 Lin, B.; Giurgiutiu, V. (2012) “Power and Energy Transduction Analysis of Piezoelectric Wafer Active Sensors for Structural Health Monitoring”, Structural Health Monitoring – an International Journal, Vol. 11, No. 1, pp. 109-121, Jan 2012
Full paper

 

2011 top

J77 Giurgiutiu, V.; Santoni-Bottai, G. (2011) “Structural Health Monitoring of Composite Structures with Piezoelectric Wafer Active Sensors”, AIAA Journal, Vol. 49, No. 3, pp. 565-581, March 2011
Full paper

J76 Giurgiutiu, V.; Lin, B.; Santoni-Bottai, G.; Cuc, A. (2011) “Space Application of Piezoelectric Wafer Active Sensors for Structural Health Monitoring”, Journal of Intelligent Material Systems and Structures, Vol. 22, No. 8, pp. 1359-1370, August 2011
Full paper

J75 Giurgiutiu, V. (2011) “Piezoelectric Wafer Active Sensors for Structural Health Monitoring of Composite Structures Using Tuned Guided Waves”, J. Eng. Mater. Technol., Vol. 133, No. 4, pp. 041012.1-.6, Oct. 2011 (6 pages)
Full paper

 

2010top

J74 Yu, L.; Bottai-Santoni, G.; Giurgiutiu, V. (2010) “Shear Lag Solution for Tuning Ultrasonic Piezoelectric Wafer Active Sensors with Applications to Lamb Wave Array Imaging”, International Journal of Engineering Science, Vol. 48, Issue 10, pp. 848-861, Oct. 2010
Full paper

J73 Lin, B.; Giurgiutiu, V.; Pollock, P.; Xu, B.; Doane, J.; (2010) “Durability and Survivability of Piezoelectric Wafer Active Sensors on Metallic Structures”, AIAA Journal, Vol. 48, No. 3, pp. 635-643, March 2010
Full paper

J72 He, J.; Jiang, J. C.; Liu, J.; Collins, G.; Chen, C. L.; Lin, B.; Giurgiutiu, V.; Guo, R. Y.; Bhalla, A.; Meletis, E. I. (2010) “Ferroelectric BaTiO3 Thin Films on Ti Substrate Fabricated Using Pulsed-Laser Deposition”, Journal of Nanoscience and Nanotechnology, Vol. 10, No. 9, pp. 6245-6250, 2010. doi: DOI 10.1166/jnn.2010.2567
Full paper

J71 Giurgiutiu, V.; Xu, B., Liu, W., (2010) “Development and Testing of High-Temperature Piezoelectric Wafer Active Sensors for Extreme Environments", Structural Health Monitoring – an International Journal, Vol. 9, No. 6, pp. 513-525, 2010
Full paper

J70 Giurgiutiu, V. (2010) “Structural Health Monitoring with Piezoelectric Wafer Active Sensors – Predictive Modeling and Simulation”, INCAS Bulletin, Vol. 2, No. 3, 2010, pp. 31-44, Sept. 2010
Full paper

J69 Giurgiutiu, V. (2010) “Damage Assessment of Structures – an US Air Force Office of Scientific Research Structural Mechanics Perspective”, Smart Structures and Systems, Vol. 6, No. 2, pp. 135-146, March 2010
Full paper

 

2009top

J68 Yu, L.; Giurgiutiu, V. (2009) “Multi-Mode Damage Detection Methods with Piezoelectric Wafer Active Sensors”, Journal of Intelligent Material Systems and Structures, Vol.20, No. 11, July 2009, pp.1329-1341
Full paper

J67 Giurgiutiu, V.; Santoni-Bottai, G. (2009) “Extension of the Shear-Lag Solution for Structurally Attached Ultrasonic Active Sensors”, AIAA Journal, Vol. 47, No. 8, pp. 1980-1983, Aug. 2009
Full paper

J66 Giurgiutiu, V. (2009) “Flight Structures Fundamental Research Trends and Directions”, Aeronautical Journal of RAeS, Vol. 113, No. 1144, pp. 331-337, June 2009
Full paper

 

2008top

J65 Yu, L.; Santoni-Bottai, G.; Xu, B.; Liu, W.; Giurgiutiu, V., (2008) “Piezoelectric Wafer Active Sensors for In Situ Ultrasonic-Guided Wave SHM”, Journal of Fatigue & Fracture of Engineering Materials & Structures, Vol.31, No. 8, pp.611-628, Aug. 2008
Full paper

J64 Yu, L.; Giurgiutiu, V. (2008) “In situ 2-D piezoelectric wafer active sensors arrays for guides wave damage detection”, Ultrasonics, Vol. 48, No. 2, pp. 117-134, April 2008, Elsevier Press
Full paper

J63 Weaver, J.; Yuan, Z.; Liu, J.; Collins, G.; Chen, C. L.; Jiang, J. C.; He, J.; Meletis, E. I.; Guo, R. Y.; Bhalla, A.; Lin, B.; Giurgiutiu, V.; Cole, M. W. (2008) “Integration of Ferroelectric BaTiO3 Thin Films Directly on Ni and Ti Metallic Tapes for Structural Health Monitoring Systems and Energy Harvesting Applications”, Integrated Ferroelectrics, Vol. 100, pp. 61-71, 2008, doi: Pii 906862671, Doi 10.1080/10584580802540355
Full paper

J62 Jiang, J.C.; Meletis, E.I.; Yuan, Z.; Liu, J.; Chen, C. L.; Lin, B. Giurgiutiu, V.; Guo, R. Y.; Bhalla, A. S.; Liu, D.; White, K. W. (2008) “Orientation Preferred Structures in BaTiO3 Thin Films on Ni Substrates", Journal of Nano Research, Vol. 1 (2008) pp. 59-63
Full paper

 

2007top

J61 Friedman, H. I.; Giurgiutiu, V.; Bender, J. W.; Crachiolo, G.; Yost, M. J. (2007) “A Biomechanical and Morphologic Analysis of Capsule Formation around Implanted PWAS sensors in Rats Treated with COX-2 Inhibitor”, Annals of Plastic Surgery, Vol. 60, No. 2, pp. 198-203, 2007
Full paper

J60 Yuan, Z.; Liu, J.; Weaver, J.; Chen, C. L.; Jiang, J. C.; Lin, B.; Giurgiutiu, V.; Bhalla, A., Guo, R. Y. (2007) “ Ferroelectric BaTiO3 thin films on Ni metal tapes using NiO as buffer layer", Applied Physics Letters, vol. 90, p. 202901 2007
Full paper

J59. Yu, L.; Giurgiutiu, V. (2007) “In-situ Optimized PWAS Phased Arrays for Lamb Wave Structural Health Monitoring”, Journal of Mechanics of Materials and Structures, Vol.2, No.3, pp. 459-488, 2007, http://pjm.math.berkeley.edu/jomms/2007/2-3/p04.xhtml
Full paper

J58. Xu, B.; Giurgiutiu, V. (2007) “Single Mode Tuning Effects on Lamb Wave Time Reversal with Piezoelectric Wafer Active Sensors for Structural Health Monitoring”, Journal of Nondestructive Evaluation, Vol. 26, No. 2-4, pp. 123-134, Dec. 2007, Springer Verlag
Full paper

J57. Santoni, G. B.; Yu, L.; Xu, B.; Giurgiutiu, V. (2007) “Lamb Wave Mode Tuning of Piezoelectric Wafer Active Sensors for Structural Health Monitoring”, ASME Journal of Vibration and Acoustics, Vol. 129, No. 6, pp. 752-762, Dec. 2007
Full paper

J56. Giurgiutiu, V.; Yu, L.; Kendall, J.; Jenkins, C. (2007) “In situ imaging of crack growth with piezoelectric wafer active sensors”, AIAA Journal, Vol. 45, No. 11, pp. 2758-2769, Nov. 2007
Full paper

J55. Cuc, A.; Giurgiutiu, V.; Joshi, S.; Tidwell, Z. (2007) “Structural health monitoring with piezoelectric wafer active sensors for space applications”, AIAA Journal, Vol. 45, No. 12, pp. 2838-2850, Dec. 2007
Full paper

 

2006 top

J54. Nothwang, W. D.; Hirsch, S. G.; Demaree, J. D.; Hubbard, C. W.; Cole, M. W.; Lin, B.; Giurgiutiu, V. (2006) “Direct Integration of Thin Film Piezoelectric Sensors with Structural Materials for Structural Health Monitoring”, Integrated Ferroelectrics, Vol. 83, pp. 139-148, doi: Doi 10.1080/10584580600950756
Full paper

J53. Matthews, L.; Giurgiutiu, V.; Sundaresan, V. B.; Leo, D. (2006) “Bioenergetic and Mechanical Actuation Analysis with Membrane Transport Experiments for Use in Biomimetic Nastic Structures”, Journal of Materials Research, Vol. 21, No. 8, Aug. 2006
Full paper

J52. Lin, B.; Giurgiutiu, V. (2006) “Modeling and Testing of PZT and PVDF Piezoelectric Wafer Active Sensors”, Smart Materials and Structures, Vol. 15, No. 4, pp. 1085-1093, Aug. 2006
Full paper

J51. Giurgiutiu, V.; Xu, B.; Chao, Y.; Liu, S.; Gaddam, R. (2006) “Smart Sensors for Monitoring Crack Growth under Fatigue Loading Conditions”, Smart Structures and Systems – an International Journal of Mechatronics, Sensors, Monitoring, Control, Diagnosis, and Maintenance, Vol. 2, No. 2, pp. 101-113, April 2006, Techno-Press, R. o. Korea
Full paper

J50. Giurgiutiu, V. (2006) “Concept of Adaptronic Structures”, at-Automatisierungstechnik 2006, Volume 54, Issue 6, pp. 251-258 (http://www.at-automatisierungstechnik.de)
Full paper

J49. Bender, J. W.; Friedman, H. I.; Giurgiutiu, V.; Watson, C.; Fitzmaurice, M. (2006) “The Use of Biomedical Sensors to Monitor Capsule Formation around Soft Tissue Implants”, Annals of Plastic Surgery, Vol. 56, No. 1, pp. 72-77, Jan. 2006
Full paper

 

2005top

J48. Yu, L.; Giurgiutiu, V. (2005) “Advanced Signal Processing for Enhanced Damage Detection with Piezoelectric Wafer Active Sensors”, Smart Structures & Systems – an International Journal of Mechatronics, Sensors, Monitoring, Control, Diagnosis, and Maintenance, Vol. 1, No. 2, pp. 185-215, April 2005, Techno-Press, R. o. Korea
Full paper

J47. Giurgiutiu V.; Zagrai, A. (2005) “Damage Detection in Thin Plates and Aerospace Structures with the Electro-Mechanical Impedance Method”, Structural Health Monitoring – an International Journal¸ Sage Pub., Vol. 4, No. 2, pp. 99-118, June 2005 Ranked #2 among “Most-Cited Articles of Structural Health Monitoring, International Journal as of September 2010” http://shm.sagepub.com/reports/most-cited
Full paper

J46. Giurgiutiu, V.; Lyons, J.; Rocheleau, D.; Liu, W. (2005) “Mechatronics/Microcontroller Education for Mechanical Engineering Students at the University of South Carolina”, Mechatronics, Pergamon Press, Vol. 15, No. 9, pp. 1025-1036, 2005
Full paper

J45. Giurgiutiu, V.; Cuc, A. (2005) “Embedded Nondestructive Evaluation for Structural Health Monitoring, Damage Detection, and Failure Prevention”, Shock and Vibration Digest, Sage Pub., Vol. 37, No. 2, pp. 83-105, March 2005
Full paper

J44. Giurgiutiu, V. (2005) “Tuned Lamb-Wave Excitation and Detection with Piezoelectric Wafer Active Sensors for Structural Health Monitoring”, Journal of Intelligent Material Systems and Structures, Vol. 16, No. 4, pp. 291-306, April 2005
Full paper

J43. Gelman, L.; Giurgiutiu, V.; Bayoumi, A. (2005) “Statistical Analysis of the Dynamic Mean Excitation for a Spur Gear”, ASME Journal of Vibration and Acoustics, Vol. 127, No. 2, pp. 204-207, April 2005
Full paper

 

2004top

J42. Pomirleanu, R.; Giurgiutiu, V. (2004) “High-Field Characterization of Piezoelectric and Magnetostrictive Actuators”, Journal of Intelligent Material Systems and Structures, Sage Pub, Vol. 15, No. 3, pp. 161-180, March 2004
Full paper

J41. Giurgiutiu, V.; Zagrai, A.; Bao, J. (2004) “Damage Identification in Aging Aircraft Structures with Piezoelectric Wafer Active Sensors”, Journal of Intelligent Material Systems and Structures, Sage Pub., Vol. 15, No. 6, pp. 673-687, Sept-Oct. 2004
Full paper

J40. Giurgiutiu, V.; Friedman, H.; Bender, J.; Borg, T.; Yost, M. J.; Newcomb, W.; Black, A.; Bost, J.; Stewart, C. D. (2004) “Electromechanical Impedance Sensor for In-Vivo Monitoring the Body Reaction to Implants”, Journal of Investigative Surgery, Vol. 17, No. 5, pp. 257-270, Sept-Oct. 2004
Full paper

J39. Giurgiutiu, V.; Bao, J. (2004) “Embedded-Ultrasonics Structural Radar for In-Situ Structural Health Monitoring of Thin-Wall Structures”, Structural Health Monitoring – an International Journal, Vol. 3, Number 2, pp. 121-140, June 2004
Full paper

J38. Gelman, L.; Giurgiutiu, V.; Petrunin, I. (2004) “Advantage of Using the Fourier Components Pair instead of Power Spectral Density for Fatigue Crack Detection”, International Journal of Condition Monitoring and Diagnostics Engineering Management, UK, Vol. 7, No. 2, pp. 23-32, April 2004
Full paper

 

2003top

J37. Giurgiutiu, V.; Zagrai, A. N.; Bao J.; Redmond, J.; Roach, D.; Rackow, K. (2003) “Active Sensors for Health Monitoring of Aging Aerospace Structures”, International Journal of the Condition Monitoring and Diagnostic Engineering Management, UK, Vol. 6, No. 1, pp. 3-21, Jan. 2003
Full paper

J36. Giurgiutiu, V.; Harries, K.; Petrou, M.; Bost, J.; Quattlebaum, J. B. (2003) “ Disbond Detection with Piezoelectric Wafer Active Sensors in RC Structures Strengthened with FRP Composite Overlays ”, Earthquake Engineering and Engineering Vibration, Vol. 2, No. 2, pp. 213-224, Dec. 2003
Full paper

J35. Giurgiutiu, V.; Bao, J.; Zhao, W. (2003) “Piezoelectric-Wafer Active-Sensor Embedded Ultrasonics in Beams and Plates”, Experimental Mechanics, Vol. 43, No. 4, pp. 428-449, Dec. 2003, Sage Pub.
Full paper

J34. Giurgiutiu, V. (2003) “Embedded NDE with Piezoelectric Wafer Active Sensors in Aerospace Applications”, Journal of Materials (JOM) – Special Online Issue on NDE, January 2003, Hhttp://www.tms.org/pubs/journals/JOM/0301/Giurgiutiu/Giurgiutiu-0301.html
Full paper

J33. Giurgiutiu, V. (2003) “Embedded Ultrasonics NDE with Piezoelectric Wafer Active Sensors”, Journal Instrumentation, Mesure, Metrologie, RS series 12M, Vol. 3, No. 3-4, pp. 149-180, 2003, Lavoisier Pub., Paris, France
Full paper

 

2002 top

J32. Giurgiutiu, V.; Zagrai, A. N.; Bao, J. (2002) “Embedded Active Sensors for In-Situ Structural Health Monitoring of Thin-Wall Structures”, ASME Journal of Pressure Vessel Technology, Vol. 124, No. 3, pp. 293-302, Aug. 2002
Full paper

J31. Lyons, J.; Laub, D.; Giurgiutiu, V; Petrou, M.; Salem, H. (2002) “Effect of Hygrothermal Aging on the Fracture of Composite Overlays on Concrete”, Journal of Reinforced Plastics and Composites, Vol. 21, No. 4, pp. 293-309, 2002, Sage Pub.
Full paper

J30. Giurgiutiu, V.; Zagrai, A. N.; Bao, J. (2002) “Piezoelectric Wafer Embedded Active Sensors for Aging Aircraft Structural Health Monitoring”, Structural Health Monitoring – an International Journal, Vol. 1, No. 1, pp. 41-6, July 2002, Sage Pub. 1
Full paper

J29. Giurgiutiu, V.; Zagrai, A. N. (2002) “Embedded Self-Sensing Piezoelectric Active Sensors for Online Structural Identification”, ASME Journal of Vibration and Acoustics, Vol. 124, pp. 116-125, Jan. 2002
Full paper

J28. Pomirleanu, R.; Giurgiutiu, V. (2002) “Full Stroke Static and Dynamic Analysis of High-Power Piezoelectric Actuators”, Journal of Intelligent Material Systems and Structures, Vol. 13, No. 5, May 2002
Full paper

J27. Giurgiutiu, V.; Bayoumi, A. E.; Nall, G. (2002) “Mechatronics and Smart Structures: Emerging Engineering Disciplines of the New Millennium”, Journal of Mechatronics, Pergamon Press, UK, Vol. 12, No. 2, pp. 169-181, March 2002
Full paper

 

2001top

J26. Zagrai, A.; Giurgiutiu, V. (2001) “Electro-Mechanical Impedance Method for Crack Detection in Thin Plates”, Journal of Intelligent Material Systems and Structures, Vol. 12, No. 10, pp. 709-718, Oct. 2001
Full paper

J25. Giurgiutiu, V.; Lyons, J.; Petrou, M.; Laub, D.; Whitley, S. (2001) “Fracture Mechanics Testing of the Bond between Composite Overlays and Concrete Substrate”, Journal of Adhesive Science and Technology, Vol. 15, No. 11, pp. 1351-1371, 2001, VSP International Science Pub., The Netherlands
Full paper

J24. Giurgiutiu, V.; Jichi, F.; Berman, J.; Kamphaus, J. (2001) “Theoretical and Experimental Investigation of Magnetostrictive Composite Beams”, Smart Materials and Structures, IOP Publishers, UK, Vol. 10, No. 5, pp. 934-945, Oct. 2001
Full paper

J23. Giurgiutiu, V.; Grant, L.; Grabill, P.; Wroblewski, D. (2001) “Helicopter Health Monitoring and Failure Prevention through Vibration Monitoring Enhancement Program”, International Journal of Condition Monitoring and Diagnostic Engineering Management, UK, 2001 Vol. 4, No. 4, pp. 33-40, 2001
Full paper

 

2000top

J22. Giurgiutiu, V.; Zagrai, A. (2000) “Characterization of Piezoelectric Wafer Active Sensors”, Journal of Intelligent Material Systems and Structures, Technomic Pub., USA, Vol. 11, No. 12, pp. 959-976, Dec. 2000
Full paper

J21. Giurgiutiu, V. (2000) “Active-Materials Induced-Strain Actuation for Aeroelastic Vibration Control”, Shock and Vibration Digest, Sage Pub., UK, Vol. 32, No. 5, pp. 355-368, Sept. 2000
Full paper

J20. Giurgiutiu, V. (2000) “Review of Smart Materials Actuation Solutions for Aeroelastic and Vibration Control”, Journal of Intelligent Material Systems and Structures, Technomic Pub., USA, Vol. 11, No. 7, July 2000, pp. 525-544
Full paper

 

1999top

J19. Giurgiutiu, V.; Reynolds, A.; Rogers, C. A. (1999) “Experimental Investigation of E/M Impedance Health Monitoring of Spot-Welded Structural Joints”, Journal of Intelligent Material Systems and Structures, Technomic Pub., USA, Vol. 10, No. 10, pp. 802-812, Oct. 1999
Full paper

 

1998top

J18. Giurgiutiu, V.; Ionita, A.; Dillard, D. A. (1998) “Details of the Integral Equation Method Applied to the Analysis of an Adhesive Layer Crack”, International Journal of Solids and Structures, Pergamon Press, UK, Vol. 35, No. 11, pp. 1099-1130, Jan. 1998
Full paper

 

1997top

 

J17. Giurgiutiu, V.; Rogers, C.A.; and McNeil, S. (1997), “Static and Dynamic Testing of Large-Amplitude Rotary Induced-Strain (LARIS Mk 2) Actuator”, Journal of Intelligent Material Systems and Structures, Technomic Pub. Co. Vol.8, pp. 502-512, April 1997
Full paper

J16. Giurgiutiu, V.; Rogers, C.A.; Chaudhry, Z. (1997) “Design of Displacement Amplified Induced Strain Actuators for Maximum Energy Output”, ASME Journal of Mechanical Design, Vol. 119, No. 4, pp. 421-524, Dec. 1997
Full paper

J15. Giurgiutiu, V. and Rogers, C.A. (1997) “Large-Amplitude Rotary Induced-Strain (LARIS) Actuator”, Journal of Intelligent Material Systems and Structures, Vol. 8, No. 1, pp.41-50, Jan. 1997, Technomic Pub. Co.
Full paper

J14. Giurgiutiu, V.; Rogers, C. A. (1997) “Power and Energy Characteristics of Solid-State Induced-Strain Actuators for Static and Dynamic Applications”, Journal of Intelligent Material Systems and Structures, Vol. 8, No. 9, pp. 738-750, Sep. 1997
Full paper

 

1996top

J13. Giurgiutiu, V., Rogers, C.A., and Rusovici, R. (1996) “Solid-State Actuation of Rotor-Blade Servo-Flap for Active Vibration Control”, Journal of Intelligent Material Systems and Structures, Vol. 7, No. 2, pp. 192-202, March 1996, Technomic Pub. Co.
Full paper

J12. Giurgiutiu, V., Chaudhry, Z. and Rogers, C.A. (1996) “Energy-Based Comparison of Solid-State Induced-Strain Actuators”, Journal of Intelligent Material Systems and Structures, Vol. 7, No. 1, pp. 4-14, January 1996, Technomic Pub. Co.
Full paper

J11. Giurgiutiu, V. and Rogers, C.A. (1996) “Dynamic Power and Energy Capabilities of Commercially-Available Induced-Strain Actuators”, Journal of Intelligent Material Systems and Structures, pp. 656-667, Nov. 1996, Technomic Pub. Co.
Full paper

J10. Giurgiutiu, V., Z. Chen, Lalande, F., and Rogers, C.A., Quattrone, R., and Berman, J. (1996) “Passive and Active Tagging of Reinforced Composite Samples for In-Process and In-Field Non-Destructive Evaluation”, Journal of Intelligent Material Systems and Structures, Vol. 7, No. 1, pp. 623-634, Nov. 1996, Technomic Pub. Co.
Full paper

 

1995-1975top

J9. Giurgiutiu, V., Chaudhry, Z. and Rogers, C.A. (1995) “Engineering Feasibility of Induced-Strain Actuators for Rotor Blade Active Vibration Control”, Journal of Intelligent Material Systems and Structures, Vol. 6, No. 5., pp. 583-597, September 1995, Technomic Pub. Co
Full paper

J8. Popescu, B., Giurgiutiu, V. (1994) “Several Considerations Regarding the Variable Length Blade Rotor”, Journal of Aircraft, Vol. 31, No. 4, pp. 975-977, July-August 1994
Full paper

J7. Giurgiutiu, V., and Reifsnider, K. L. (1994) “Development of Strength Theories for Random Fiber Composites”, Journal of Composites Technology and Research, Vol. 16, No. 2, pp. 103-114, April 1994
Full paper

J6. Giurgiutiu, V., Oncescu, F., Gaita, L. (1990) “New Developments in the Dynamic Aeroelastic Stability Study of Rotor Blades”, Revue Roumain Science Technique ‑ Mechanique Appliqué, Vol. 35, No. 2, p.p. 137‑146, 1990, Romanian Academy Press, Bucharest, Romania
Full paper

J5. Giurgiutiu, V., Kalmutchi, P. (1989) “Mode-Shape Calculation for Helicopter Blades with Various Hub Conditions”, (in Romanian), Applied Mechanics Research, Vol. 48, No. 1, pp. 21‑33, 1989, Romanian Academy Press, Bucharest, Romania
Full paper

J4. Giurgiutiu, V., Stafford, R. O. (1977) “Semi‑Analytic Methods for Frequencies and Mode-Shapes of Rotor Blades”, Vertica, Vol. 1, pp. 291‑306, 1977,Pergamon Press, UK
Full paper

J3. Giurgiutiu, V. (1976) “The Use of Finite Element Methods in the Analysis of Geometrically Nonlinear Structures, Part II: Dynamic Regime” (in Romanian), Applied Mechanics Research, Vol. 35, No. 1, pp. 147‑156, 1976, Romanian Academy Press, Bucharest, Romania
Full paper

J2. Stafford, R. O., Giurgiutiu, V. (1975) “Semi‑Analytic Method for Rotating Timoshenko Beams”, Int. J. Mech. Sci., Vol. 17, pp. 719‑727, 1975, Pergamon Press, UK
Full paper

J1. Giurgiutiu, V. (1975) “The Use of Finite Element Method in the Analysis of Geometrically Nonlinear Structures, Part I: Static Regime” (in Romanian), Applied Mechanics Research, Vol. 34, No. 2, Romanian Academy Press, Bucharest, Romania, 1975, pp. 185‑200
Full paper